Hellvape Dead Rabbit Solo RDA


RDA Hellvape Dead Rabbit Solo 22mm Features: • 22mm x 32.8mm dimensions • Stainless steel build deck • Threaded flathead screw clamps mechanism

  • Single coil configuration • PEAK insulation

Stainless steel tank

  • Drip Tip: 810 • Threaded 510 BF Pin Connection • Gold Plated Contact Pin • Honeycomb Airflow Control Adjustment

The Hellvape Dead Rabbit Solo 22mm RDA has a single coil build deck, flexible airflow control, and squonk mod compatibility. The Dead Rabbit Solo RDA’s basic build deck allows for huge or unique coil setups and is made of sturdy stainless steel. The Dead Rabbit Solo RDA works best on squonk mods but can be used on any 510 threaded box mod with enough power. Hellvape handed along their latest Dead Rabbit accessory, a tiny single coil RDA! I was disappointed by a number of their previous two coil RDAs, but I was excited to try the Dead Rabbit Solo RDA because it would be better for squonk mods, my preferred dripper setup.



22mm diameter, 21.8mm tall (excluding drip tip and 510)

RDA single coil

Includes squonk pin

Hellvape Dead Rabbit Solo RDA unboxing

The Dead Rabbit Solo has an 810 drip tip, however the parts and tools package includes a 510 converter. A coil cutting guide, brief user manual, and a good readymade Ni80 fused clapton and cotton strip are included.

The Dead Rabbit Solo comes in seven colors, as usual from Hellvape. Unfortunately, I received my least preferred colors, gold and rainbow. However, after some debate, I chose gold since it looked great on my red squonk mod (most of which are red). sort something like Si not liking black mods!)

Squonk pin and Hellvape Dead Rabbit Solo RDA accessories

The first step was to open the spares bag and swap the solid positive pin with the squonk pin to make this a squonkable RDA. Hellvape has provided the right-sized allen key in the box, so you won’t have to search for tools. Just remember to keep track of the insulator and fit it before usage.

Initial Hellvape Dead Rabbit Solo RDA build

The deck design is simple with two large posts that can accommodate even the chunkiest exotic builds and 2.8 x 2.5mm post holes. Instead of Dead Rabbit “bunny ears,” it uses the “pre-cut your coil legs to length and drop them in” method. After cutting the legs to 5mm, I fitted one of my kanthal triple core fused claptons instead of the nichrome coil, which worked fine.

The squonk pin is raised slightly above the base, creating a juice reservoir, and the drip well is generous at 5.2mm.

Hellvape Dead Rabbit Solo RDA top cap

The Dead Rabbit Solo’s main barrel has a relatively small chamber, so the coil won’t be far from the airflow from the build. Bringing the thirty 1.2mm airflow holes up to the coil is a tight squeeze with only 9mm to play with and the barrel attached! I liked the doming at the top of the chamber and the two perforations on the top, which I believe guide dripped liquid to the coil and cotton.


There are no reviews yet.

Be the first to review “Hellvape Dead Rabbit Solo RDA”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top